Anything larger than this should only be felled by a trained and competent.

Hands-on techniques for felling trees Basic Felling Techniques. Note: on this page, ‘front’ and ‘back’ are arbitrary terms, the front being the side towards Felling Larger Trees. The procedure described below is suitable for trunks up to about mm (8”) diameter at the base.

Felling Small Trees. Dec 09, Using a Chainsaw 1. Cut on a notch at a degree angle. Decide the direction that you want the tree to fall because this is the side of 2. Make a horizontal cut ⅓ through the tree. Use the %(6). Sep 01, Using two wedges, side by side, drive one home so that there is a gap between the stem and the top of the other wedge. Place a shim in the gap above the free wedge until it is snug, and then pound in the shim by driving the wedge.

This should either fell. Apr 03, In this video Inbred Jed and myself demonstrate 8 different ways to drop a tree and the different applications of the different cutting stumplopping.bar go over.

First, make a plan that includes felling-to-lead. This means that you are cutting in a way that ensures the tree will fall in a certain direction. In this case, the tree is angled 30 to 45 degrees to either side of the skid trail. Keep an eye out for potential “widow makers”.

Splitting, even with a power splitter, is a LOT of work especially with a soft and wet wood like that (when freshly cut), plus you would have to cut to fireplace length, and most splitters can not handle very large diameter pieces even if you could get them up on it.

Sep 08, The basic items need to fell trees safely here, atop a freshly cut elm: helmet, goggles, gloves, chain saw, maul, and wedges. NORMAN E. JOHNSON Woodcutters select a.

Making the Back Cut. The back cut is a horizontal cut that is 2 to 5 inches above the apex of the notch. If the tree is leaning in the direction you want it to fall, it should start falling when the back cut extends about halfway through the trunk. atlanta tree removal