Aug 29, Removing tuner bushings from a Martin guitar headstock. I used a 2 homemade tool. It works really great and the result is totally stumplopping.baround song: h. Oct 15, Here is a quick clip on how to remove the press-in bushings for Kluson type tuners. This is the way I do it and it has worked well for me over the years. You. Oct 09, Re: Removing tuner bushings. Post. by StevenO» Mon Oct 08, pm. Find a long screw drive in which the shaft fits the tuner hole.
From behind, have the screwdriver go through the headstock so that it grips the tuner ferrule and then lightly tap the end of handle of the screwdriver so that screwdriver pushes out the ferrule just through pressure alone.
May 11, Hey guy's i need some advice getting these stock bushings out without tearing the finish around the tuners holes. I took the stock tuners off the 59 last night getting it ready to install the new klusons i have coming.
in the past i have torn the paint around the tuner hole removing these dammed bushings. usually not a big deal cause the replacment tuners had the hex bolt bushings and you. Mar 25, Delicately tap on the bushing in several spots until it pops out.
Just tree cutting services cavite sure you push it up evenly, so it doesn't compress the wood in one spot. Nov 19, # Jul 28, Drill a hole slightly larger than the bushing into a scrap piece of wood and hold it tight against the headstock while you push from the back side. Even a socket from a socket set will do in a pinch, carefull of the finish and how hard you push.