Rim Diameter.

May 17, Best to have the L/U secured in a vise so it doesn't move about and jar the shift shaft. Push down firmly on the shift shaft as you're pulling the bushing up-and-off.

Otherwise, Bad Things will happen! Never Fear, it is a recoverable error, and there is a way to get the shift shaft reiinstalled without dismantling the L/stumplopping.barted Reading Time: 9 mins.

These tool set is time saver to remove worn shift shaft bushing with no the inner primary removing need, swapped out the bushing in approximately 20 minutes.(Also help install the new bushing) Pretty easy and quick work to do with this tool if you need remove and install your own bushings/5(15).

JIMS Shift Pedal Shaft Bushing Tool - For models listed w/5- or 6-speed transmission. Time-saving tool removes worn shift shaft bushings in Big Twin primaries without having to remove the inner primary.

Tool also will install new bushings to the correct location. Bushings can be swapped out in approximately 20 minutes using this tool - a huge time saver.5/5(18). Jul 12, Discussion Starter #8 Jul 12, Breeze3at said: I just looked at a '93 diagram, and B is the bushing for the shaft that goes behind the heel/toe shifter. H5 may be a color or material code. While I had my shaft out, I drilled & tapped the case for a zerk fitting.

Now it gets greased. Problem fixed: Bushing was worn. 1. Remove the 6 screws that hold the lower gear housing together.

2. Remove propeller shaft and gears. 3. Remove the driveshaft and the shift rod. 4. Use the bushing removal to tap out the old bushing. 5. Remove the old o-ring 6. Put in a new o-ring.

/5(37).